Adult Spinal Deformity, Cervical Spondylosis With Myelopathy, Coronal Vertical Axis, Degenerative Scoliosis, Lumbar Disc Herniation, Lumbar Spinal Stenosis, Sagittal Deformity, Sagittal Imbalance
Conditions
Brief summary
This cross-sectional observational study aims to quantitatively compare three-dimensional gait parameters, surface electromyography (EMG) patterns, and radiological parameters among patients with different degenerative spinal conditions-including lumbar disc herniation (LDH), lumbar spinal stenosis (LSS), lumbar sagittal imbalance (LSI), degenerative lumbar scoliosis (DLS), and cervical spondylotic myelopathy (CSM)-alongside a healthy control group. The analysis focuses on spatiotemporal gait characteristics (step length, stride length, cadence), lower limb kinematics and kinetics (hip/knee/ankle joint angles, moments, and powers during stance and swing phases), and surface EMG amplitudes (thoracic erector spinae, multifidus, gluteus maximus, and rectus abdominis muscles) during standardized walking tasks. Additionally, radiological parameters (e.g., pelvic incidence-lumbar lordosis mismatch, C2-C7 sagittal vertical axis, coronal Cobb angle) will be correlated with gait and muscle activation deviations. The study employs motion capture systems, force plates, and high-density EMG to objectively differentiate disease-specific movement impairments. Findings from this study may establish biomechanical and neuromuscular signatures for each degenerative condition, providing a framework for personalized rehabilitation strategies, gait retraining, and surgical outcome assessment in spinal disorders. Comparative analysis with healthy controls will further elucidate pathological alterations in gait and muscle recruitment patterns caused by degenerative spinal diseases.
Interventions
OTHERGait analysis and surface electromyography analysis
A comprehensive motion analysis system was employed to assess biomechanical parameters during functional tasks. Ground reaction forces (GRFs) were measured using an instrumented force plate, while muscle activation patterns were recorded via surface electromyography (sEMG). Three-dimensional kinematic data were concurrently captured using motion-capture cameras. The standardized testing protocol consisted of: (1) quiet standing (30-second trial) and (2) three consecutive back-and-forth walking cycles (5-meter walkway), enabling the quantification of both static postural control and dynamic gait characteristics.
Sponsors
Xuanwu Hospital, Beijing
Study design
Observational model
CASE_CONTROL
Time perspective
CROSS_SECTIONAL
Eligibility
Sex/Gender
ALL
Age
60 Years to No maximum
Healthy volunteers
Yes
Inclusion criteria
1. Patients with the following single disease: degenerative scoliosis, coronal imbalance, lumbar spinal stenosis, lumbar disc herniation, spinal cord-type cervical spondylosis; 2. Age ≥ 60 years, regardless of gender; 3. Planned to undergo elective open spinal fusion surgery; 4. Voluntarily participate in the study, understand and agree to the study content, and sign the informed consent form.
Exclusion criteria
1. History of previous spinal surgery; 2. Combined with other neuromuscular diseases (such as Parkinson's disease), inflammatory diseases (such as ankylosing spondylitis), infectious diseases (such as spinal tuberculosis), sepsis, tumors, or lower limb joint diseases that may cause low back and lower limb pain, affecting physical activity; 3. Suffering from severe cardiovascular, cerebral, liver, or kidney disease; 4. Suffering from mental illness, dementia, or unable to cooperate to complete clinical research. * Skin rupture in the waist;
Design outcomes
Primary
| Measure | Time frame | Description |
|---|---|---|
| Median Frequency | one week before surgery | The median frequency of surface electromyography (sEMG) refers to the frequency point in the power spectrum where the total energy is divided into two equal parts (i.e., 50% of the energy lies above and below this frequency) through spectral analysis of the EMG signal (typically using Fast Fourier Transform, FFT). |
| The maximum root mean square of surface electromyography | one week before surgery | The maximum root mean square of surface electromyography (RMSmax) refers to the maximum activation intensity value (unit: μV or mV) of a specific muscle during the gait cycle, obtained by processing the muscle's electrical signals collected via surface electrodes using root mean square (RMS) analysis in three-dimensional gait analysis. |
| Mean Power Frequency | one week before surgery | Mean Power Frequency (MPF) is one of the key indicators in the frequency domain analysis of surface electromyography (sEMG), reflecting the main frequency energy distribution of motor unit action potentials (MUAPs) during muscle contraction. In 3D gait analysis, MPF is used to quantify muscle fatigue levels, neuromuscular control strategies, and functional movement states. |
| Velocity | one week before surgery | velocity refers to the distance traveled by the human body per unit time during walking and is one of the core parameters for evaluating dynamic gait characteristics. |
| Cadence | one week before surgery | Cadence is one of the core spatiotemporal parameters in three-dimensional gait analysis, referring to the number of steps per minute (Steps Per Minute, SPM), which reflects walking rhythm and movement efficiency. |
| Stride time | one week before surgery | In three-dimensional gait analysis, stride time refers to the time interval between two consecutive initial contacts of the same heel, representing the duration required to complete a full stride (unit: seconds). Its calculation encompasses both the stance phase and swing phase of a single lower limb, making it one of the core temporal parameters of the gait cycle. |
| Stance time | one week before surgery | Stance Time is one of the key spatiotemporal parameters in gait analysis, referring to the period from the initial contact of a single foot with the ground to its complete toe-off. It reflects the weight-bearing and stability performance of the lower limb during the walking cycle. |
| Swing time | one week before surgery | The swing phase is a stage in the gait cycle, referring to the time interval from when the foot leaves the ground (toe-off) to when the same foot touches the ground again (heel strike). |
| Stance phase | one week before surgery | The Stance Phase refers to the entire stage in the Gait Cycle when the foot is in contact with the ground, starting from Initial Contact (heel strike) and ending with Toe-Off (toe lift) of the same foot. It accounts for approximately 60%\ 65% of a normal gait cycle (reduced to about 40% during running). |
| Swing phase | one week before surgery | Swing Phase is a critical stage in the Gait Cycle, referring to the movement process from when the foot leaves the ground and swings forward until it makes contact with the ground again. During this phase, the lower limb completes actions such as acceleration and deceleration in the air, as well as preparing for the next support phase. In three-dimensional gait analysis, the Swing Phase is quantified using motion capture systems (such as marker points, force plates, and surface electromyography) to measure joint angles, muscle activity, and spatiotemporal parameters, providing objective data for clinical gait assessment. |
| Single support phase | one week before surgery | Single Support Phase is a critical stage in the Gait Cycle, referring to the period when one foot fully bears the body weight while the other lower limb is in the Swing Phase. |
| Double support phase | one week before surgery | The Double Support Phase is a crucial time stage in the gait cycle, referring to the moment during walking when both feet are simultaneously in contact with the ground. This phase holds significant importance in gait analysis, particularly in 3D Gait Analysis, where it is used to assess balance, gait stability, and neuromuscular control. |
| Stride length | one week before surgery | Stride Length refers to the horizontal distance between two consecutive points of contact by the same foot. It is a crucial parameter in gait analysis for evaluating the walking cycle, particularly significant in clinical rehabilitation, sports medicine, and biomechanics research. |
| Step Width | one week before surgery | Step Width is a crucial parameter in Gait Analysis, used to quantify gait stability and balance control during human walking. It holds significant clinical value, particularly in fields such as neuromuscular disorders, fall risk assessment, and sports injury rehabilitation. |
| Step length | one week before surgery | Step length refers to the horizontal distance between two consecutive ground contact points of the heel on the same side (i.e., the forward distance from the previous heel contact point to the next heel contact point when the left/right foot takes a step). |
| Gait Deviation Index | one week before surgery | The Gait Deviation Index is a standardized metric used to quantitatively assess the degree of gait abnormalities, calculated based on data from 3D motion analysis systems. It is widely applied in rehabilitation medicine, orthopedics, and neuroscience, particularly for gait analysis in patients with conditions such as cerebral palsy, stroke, and spinal cord injuries. |
| Hip Range of Motion | one week before surgery | Hip joint range of motion refers to the dynamic angular changes of the hip joint in three planes of movement, quantitatively measured using a motion capture system during three-dimensional gait analysis (3D Gait Analysis). It is a critical parameter for assessing gait abnormalities, hip joint function, and neuromuscular disorders. |
| Knee Range of Motion | one week before surgery | Knee range of motion refers to the dynamic movement range of the knee joint in the sagittal, coronal, and transverse planes quantitatively measured by a motion capture system during three-dimensional gait analysis. It is one of the core parameters for evaluating walking function, joint stability, and postoperative rehabilitation outcomes. |
| Ankle Range of Motion | one week before surgery | Ankle range of motion (AROM) refers to the dynamic movement range of the ankle joint during the gait cycle, typically quantified and assessed in three dimensions: the sagittal plane (flexion-extension), the coronal plane (inversion-eversion), and the horizontal plane (internal-external rotation). It holds significant importance for diagnosing gait abnormalities, monitoring rehabilitation outcomes, and surgical planning. |
| Hip joint moment | one week before surgery | Hip joint moment refers to the biomechanical load acting on the hip joint during the gait cycle, reflecting the mechanical balance of muscles, ligaments, and bones around the joint. In three-dimensional gait analysis, it is calculated using dynamic models, with units in newton-meters (N·m) or normalized to body weight multiples (N·m/kg). |
| Knee joint moment | one week before surgery | Knee joint moment is a key dynamic parameter in gait analysis, referring to the rotational force (torque) acting on the knee joint during walking or movement, which reflects the mechanical load state of the muscles, ligaments, and bones around the knee joint. |
| Ankle joint moment | one week before surgery | Ankle Joint Moment refers to the internal and external moments acting on the ankle joint in the sagittal, coronal, and horizontal planes, calculated through combined measurements using a 3D motion capture system and force plates during gait analysis. It reflects the dynamic load state of the muscles, ligaments, and skeletal structures surrounding the ankle joint. |
| Average EMG | one week before surgery | Average EMG (AEMG) refers to the average amplitude value of the electrical signals from the target muscle collected via surface electromyography (sEMG) after rectification and filtering during a gait cycle (or a specific time period) in three-dimensional gait analysis, reflecting the overall intensity of muscle activity. |
| Integrated electromyography | one week before surgery | The integrated electromyography (iEMG) is a quantitative metric in surface electromyography (sEMG) analysis, referring to the cumulative sum of EMG signal amplitudes over a specific time period, reflecting the overall intensity of muscle activity. In three-dimensional gait analysis, iEMG is commonly used to assess the synergistic activation patterns and fatigue levels of different muscles during the walking cycle. |
| Root mean square | one week before surgery | The root mean square (RMS) average of surface electromyography is a time-domain analysis method used in surface electromyography (sEMG) signal processing to quantify the electrical activity intensity of muscles during specific movements (such as walking or running). |
Secondary
| Measure | Time frame | Description |
|---|---|---|
| Oswestry disability index | one week before surgery | The validated ODI is a self-administered questionnaire for evaluating back-specific functional disability, consisting of 10 items with scores from 0 to 5, and higher ODI indicates more severe disability. |
| Visual Analogue Scale | one week before surgery | VAS assessment uses a straight line or ruler about 10 centimeters long, with one end marked as 0 and the other as 10. 0 represents no pain, and 10 represents the most severe pain. The patient marks a point on the line according to their pain perception, and this point represents the patient's pain intensity. |
Countries
China
Contacts
Primary ContactShibao Lu
Backup ContactZuoran Fan
Outcome results
None listed