Skip to content

NAVIGATE GRX Study

A Multicenter Post-Market Study for the Evaluation of the CorPath® GRX technIQ Automated Movements in Percutaneous Coronary Interventions

Status
Terminated
Phases
Unknown
Study type
Observational
Source
ClinicalTrials.gov
Registry ID
NCT04883008
Enrollment
50
Registered
2021-05-12
Start date
2021-06-14
Completion date
2022-02-07
Last updated
2023-12-20

For informational purposes only — not medical advice. Sourced from public registries and may not reflect the latest updates. Terms

Conditions

Coronary Artery Disease

Brief summary

The objective of the present study is to detail the results of robotic-assisted PCI using technIQ automated movements in real-world clinical practice.

Detailed description

This multi-center, international, randomized, open-label, post-market study will enroll subjects to detail the results of robotic-assisted PCI using technIQ automated movements in real-world clinical practice by randomized comparison with a cohort of subjects undergoing robotic-assisted PCI with technIQ automated movements disabled. A secondary objective is to describe the learning curve associated with using technIQ.

Interventions

DEVICECorPath GRX with technIQ automated movements enabled (technIQ ON)

The CorPath GRX System is intended for use in the remote delivery and manipulation of guidewires and rapid exchange catheters, and remote manipulation of guide catheters during percutaneous coronary and vascular procedures. TechnIQ automated movements are software-based automation of common maneuvers that interventionalists perform when manipulating catheters, guidewires, and devices by hand. In this group, automated movements will be enabled and used at the discretion of the interventionalist.

DEVICECorPath GRX with technIQ automated movements disabled (technIQ OFF).

The CorPath GRX System is intended for use in the remote delivery and manipulation of guidewires and rapid exchange catheters, and remote manipulation of guide catheters during percutaneous coronary and vascular procedures. TechnIQ automated movements are software-based automation of common maneuvers that interventionalists perform when manipulating catheters, guidewires, and devices by hand. In this group, automated movements will be disabled.

Sponsors

Corindus Inc.
Lead SponsorINDUSTRY

Study design

Observational model
COHORT
Time perspective
PROSPECTIVE

Eligibility

Sex/Gender
ALL
Age
20 Years to No maximum
Healthy volunteers
No

Inclusion criteria

* Male or nonpregnant female aged ≥ 20 years. * Patients with coronary artery disease with clinical indication for Percutaneous Coronary Intervention (PCI). * The subject has been informed of the nature of the study, agrees to its provisions and has provided written informed consent.

Exclusion criteria

* Failure/inability/unwillingness to provide informed consent. * In the opinion of the investigator, the subject is deemed unsuitable for robotic PCI due to clinical status or anatomic characteristics. * Acute STEMI within 72 hours pre-procedure.

Design outcomes

Primary

MeasureTime frameDescription
Major Clinical and Angiographic Complications (MCAC)72 hours post-procedure or until immediately prior to discharge from the index procedure hospitalization, whichever occurs first.The rate of the combined MCAC endpoint (a composite of MACE and Major Clinical and Angiographic Complications) in the technIQ ON group is not significantly higher than in the technIQ OFF group.
Technical SuccessDuring the ProcedureResidual stenosis of \<30% in all target lesions with final TIMI (Thrombolysis In Myocardial Infarction) flow grade 3 by angiographic core lab analysis, AND absence of unplanned manual conversion.

Secondary

MeasureTime frameDescription
Contrast Fluid VolumeDuring the ProcedureThe total contrast volume used during the procedure.
Total Procedural TimeDuring the ProcedureThe time from the start of the sheath insertion to complete removal of the final guide catheter.
Total Fluoroscopy TimeDuring the ProcedureThe total fluoroscopy time during the procedure as recorded by an Imaging System.
Subject Radiation ExposureDuring the ProcedureDose-area-product (DAP) as recorded during the procedure
Subject Radiation DoseDuring the Procedureair kerma (AK) as recorded during the procedure.
PCI procedure timeDuring the ProcedureTime between insertion of guide catheter and final removal of guide catheter.
Procedure success72 hours post-procedure or until immediately prior to discharge from the index procedure hospitalization, whichever occurs first.The rate of procedure success in the technIQ ON group is not significantly lower than that in the technIQ OFF group.
Major adverse cardiovascular events (MACE),72 hours post-procedure or until immediately prior to discharge from the index procedure hospitalization, whichever occurs first.Reported as a composite and components of Cardiac Death, Target Vessel MI, and Target Vessel Revascularization (TVR).
Major angiographic complicationsDuring the ProcedureReported as perforation(Type 1, 2, 3) or flow-limiting dissection (Type E, F).
Serious Adverse Events (SAE)Procedure through 72 hours postprocedure or hospital discharge (whichever occurs)All Serious Adverse Events (SAEs) from the start of the CorPath GRX PCI procedure through 72 hours postprocedure or hospital discharge (whichever occurs) first will be summarized
Guidewire Wiring TimeDuring the ProcedureThe time required to advance the guidewire from the tip of the guide catheter to the final target distal to the lesion.
Fluoroscopy Time to Cross LesionDuring the ProcedureThe fluoroscopy time required to advance the guidewire from the tip of the guide catheter to the final target distal to the lesion.
Contrast Used to Cross LesionDuring the ProcedureThe amount of contrast (in ml) required to advance the guidewire from the tip of the guide catheter to the final target distal to the lesion.
Planned Manual Conversion (PMC)During the ProcedurePlanned manual conversion (PMC) is disengagement of the robotic drive to use bedside manipulation of either the guide catheter, guidewire, or delivery system that was prespecified in the procedural plan (e.g., to accommodate adjunctive devices or procedural techniques that are not compatible with the robotic platform, such as intravascular ultrasound or atherectomy devices). This will be assessed by a questionnaire.
Unplanned Manual Conversion (UMC)During the ProcedureUnplanned manual conversion (UMC) is disengagement of the robotic drive to use bedside manipulation of either the guide catheter, guidewire, or delivery system that was not prespecified in the procedural plan, and that was due to inability to navigate to the target lesion as intended, cross the target lesion as intended, treat the target lesion as intended, retract the CorPath GRX system as intended, or other CorPath system device malfunction; or any clinical condition that requires rapid medical intervention. This will be assessed by a questionnaire.
Partial Manual Assistance (PMA)During the ProcedurePartial manual assistance (PMA) is the use of manual techniques that were not prespecified in the procedural plan and do not meet the definition of unplanned manual conversion (e.g., unplanned use of manual techniques to accommodate adjunctive devices or procedural techniques that are not compatible with the robotic platform). These will be assessed by a questionnaire.
Device MalfunctionDuring the ProcedureThe device malfunction will report the inadequacy of the medical device with respect to its identity, quality, durability, reliability, usability, safety, or performance. Investigators are instructed to report all device deficiencies and device malfunctions using the device malfunction form in the EDC.

Countries

Poland

Outcome results

None listed

Source: ClinicalTrials.gov · Data processed: Feb 4, 2026