Breast Neoplasms, Radiotherapy Side Effect
Conditions
Brief summary
Recently, there is growing interest in the application of three-dimensional (3D) printed bolus to radiotherapy.At present, the researches on the application of 3D-printed bolus in breast cancer are mainly focused on air gap between skin and bolus or electron beam conformal therapy \[7,15\], there are no clinical experience with customized 3D-printed bolus for volumetric modulated arc therapy (VMAT) in daily practice has been published up to now. We aim to evaluate dosimetry and application of 3D-printed bolus for the post-mastectomy radiotherapy (PMRT) with Volumetric modulated arc therapy (VMAT). Seventy five patients with breast cancer receiving radiotherapy following post-mastectomy in our department were randomly selected in this study. The accuracy of fit of the 3D-Printed bolus to the chest wall was improved significantly relative to conventional bolus.This study demonstrates customized 3D-printed bolus in post-mastectomy radiation therapy improves fit of the bolus compared to conventional bolus. Furthermore, VMAT based on 3D-printed bolus significantly improves the chest wall target coverage and the conformity of plan, and reduces the dose of ipsilateral lung and heart, compared to conventional bolus.
Interventions
customized 3D-printed bolus fabricated based on reconstruction of computed tomography (CT) images were used in this study.
Sponsors
Study design
Eligibility
Inclusion criteria
* breast cancer patients with post-mastectomy treatment
Exclusion criteria
* NA
Design outcomes
Primary
| Measure | Time frame | Description |
|---|---|---|
| dose comparison | one year | The prescription dose was 50 Gy in 25 fractions. Dose-volume histograms (DVHs) were used dosimetric analysis. D98%, D50% and D2%, indicating dose to 98% (near-minimum dose), 50% and 2% (near-maximum dose) of both target volumes, and V95%, V100%, and V110% indicating percent volume receiving 95%, 100% and 110% of prescribed dose, were recorded |
Countries
China