Skip to content

Caries Prevention Effect of S-PRG Filler Incorporated in Denture Base Resins on Edentulous Elderly People

The Caries Prevention Effect of Surface Pre-reacted Glass-ionomer Filler Incorporated in Denture Base Resins on Edentulous Elderly People

Status
Completed
Phases
NA
Study type
Interventional
Source
ClinicalTrials.gov
Registry ID
NCT02460562
Enrollment
150
Registered
2015-06-02
Start date
2015-06-30
Completion date
2017-01-20
Last updated
2019-06-03

For informational purposes only — not medical advice. Sourced from public registries and may not reflect the latest updates. Terms

Conditions

Dental Caries

Keywords

resin denture base

Brief summary

The purpose of this study is to determine whether a novel material of S-PRG fillers containing in a daily-used resin denture base and their capability of fluoride release and recharge to elevate the salivary fluoride level and prevent dental caries in Thai middle-aged patients between 35-60 years of age who wear the resin denture.

Detailed description

The study design is a 1.5-year, double blind randomized clinical trial, with 150 volunteers between 35-60 years of age wearing palatal removable partial denture containing with/without S-PRG fillers. This study will be performed in 3 local government hospitals located around Bangkok metropolitan, Ministry of Public Health, Thailand. The subjects will be assigned to the control group; resin denture base containing without S-PRG fillers and the experimental group; resin denture base containing 20% by weight of S-PRG fillers. Two parameters we can measure are; (1) Salivary fluoride level, accessed at different time point; on day 1, 14, 15 and at 3, 12 months after wearing the denture, and (2) Caries incidence using ICDAS-II, taken at 18 months. Regarding an agreement with the participating dentists and dental assistants in the hospitals, patients in the waiting list of removable partial denture are screened according to our eligible criteria. If they meet eligibility criteria, a complete description is follow: If you agree to participate in the study, at today's visit we will ask you some questions about your medical and dental health such as what medication that you are presently taking, and whether you use fluoride supplement except for toothpaste. You do not have to answer every question. The dentist will do a brief examination of your mouth looking to see if you have any decay. You will not be able to participate in this study if you have obvious untreated tooth decay. Following completion of the questionnaire and examination, we will do a simple test on your saliva. We will collect stimulated saliva by having you to chew a piece of wax for 5 minutes. You will spit all the saliva formed during those 5 minutes into a cup. We will measure the volume of the saliva produced. You will have to have a normal flow rate to participate. Collecting this information, doing the saliva test, and completing the dental examination will take about 30 minutes of today's appointment. You may refuse to participate in any of the saliva test or answer any question or item in the questionnaire. If that is the case, you will not qualify for the study. If you do qualify and agree to take part, the dentist will take a mold of your mouth to make an upper resin denture to replace your missing teeth for you to wear. This is a routine dental procedure. Some subjects may gag while the mold is being taken for the denture. The dentist has methods to help you control the gagging reflex. Depending on which group you are assigned, your resin denture will be made from standard material or the standard material containing some new type of biological material. This new material we are testing is being used in the formulation of dental product as filling materials. At the next appointment, approximately two week later, you will come in to have the denture fitted for you. Slight discomfort may occur at the gum margin where the denture can pinch. The plate will be adjusted to relieve any pinching. On rare occasions, allergy to the resin denture base may occur. We will stop your participation in the study if you have an allergy to the resin denture. We will give you the resin denture and need you to wear it all day excluding when you sleep at night. You must take it out to brush your teeth. You may clean the denture with water and the same toothbrush that you use to brush your teeth before keeping the denture in the denture storage box. We do not want you to use anything else on the denture except material we supply. You will receive a box for keeping your denture, toothbrush and toothpaste to brush your teeth at home. At the first 14 days once you receive the denture, we do want you to soak your denture in a denture storage box containing tap water every night when you sleep. After that we will supply you a tube of fluoride gel for storing the denture instead of tap water. We will ask you to apply the gel (approximately 1 cm of length) to the denture and spread out totally on both side of the denture before keeping in the denture box during sleeping every night for 1.5 years. After wearing the denture, you will be asked to return to the clinic for check-up and recall. We will collect your saliva while wearing the denture periodically for a total of six times within one year according to our schedule for the analysis of the fluoride level. At 1.5 years, you will be asked to return to the clinic and the dentist will do a dental examination for follow-up. That will conclude your participation in the study. We will assess the salivary fluoride at different time point during 1 year. The fluoride level of saliva will show us the capability of the new material on the fluoride release and recharge. The follow up period will be extended for 6 more months. The caries information collected at 1.5 years will show us the incidence of new caries. All procedures will be done at the dental clinic of the hospital. The subjects will be identified by a number assigned only. The principle investigator and the project coordinator will have to access to the code which will remain locked at all time. The saliva collected from the subjects will be discarded immediately after complete analysis. The sample size assessment is considered based on the long term outcome, caries incidence, and the short term outcome, salivary fluoride concentration, of the study. The optimal sample size to address both outcomes in the study and allow for a 20% drop out rate would be 75 subjects per group (150 total) to provide sufficient statistical power to detect the difference in mean caries incidence between the control and the intervention group. Collected data will be entered into a computer database and analyzed with STATA software version 12 for Windows. The statistical significance level will be set at α = 0.05. The analysis plan for salivary fluoride level at each phase of follow up is based on two-sample t test and linear regression adjusting for confounders (age, number of remaining teeth). Data analysis for caries incidence will be recorded per surface using ICDAS-II severity scores at 1.5 years. The caries outcome is defined as score 1 to 6 and 1 to 2 for root caries. Two-sample t test or linear regression with adjusting for age will be performed to assess the different between the control and the intervention group in the mean number of new surface caries (dmfs) ± standard deviations at 1.5 years follow-up examination.

Interventions

Surface pre-reacted glass-ionomer (S-PRG) filler is a new type of biological material. This new material is being used in the formulation of dental product as filling materials. It has an anti-plaque effect which will release ions to alter the pH of the surrounding environment when it comes into contact with water or acidic solutions. These ions will exert their effect on caries prevention. The amount of S-PRG filler that is put in the standard resin denture base is 20% by weight. They are incorporated into the resin denture base and maintain the mechanical properties as required by ISO 1567.

DEVICEPMMA resin

Polymethyl methacrylate (PMMA) resins have been used for the fabrication of resin denture base for 50 years. The advantages of PMMA resin that most notably is the ease of fabrication with very simple equipment but a limitation is the fragility because of its physical properties that include low flexural strength and surface hardness.

Sponsors

University of Washington
CollaboratorOTHER
Kritirat Kiatsirirote
Lead SponsorOTHER

Study design

Allocation
RANDOMIZED
Intervention model
PARALLEL
Primary purpose
PREVENTION
Masking
DOUBLE (Subject, Investigator)

Eligibility

Sex/Gender
ALL
Age
35 Years to 60 Years
Healthy volunteers
Yes

Inclusion criteria

* Compliance: Understands and is willing, able and likely to comply with all study procedures and restrictions * General Health: Good general health with no clinically significant and/or relevant abnormalities of medical history or oral examination that could interfere with subject safety during the study period * Salivary Flow: Have a salivary flow rate in the range of normal values (unstimulated whole saliva flow rate \> 0.15 ml/minute; gum base stimulated saliva flow rate ≥ 1 ml/minute) * Oral condition: a) At least 6 teeth remaining natural upper teeth in good condition, including at least 2 posterior teeth. b) Adequate remaining natural or artificial lower teeth for proper function. c) Do not use fluoride supplement excluding toothpaste. and d) Present of caries risk or filling at least 1 surface.

Exclusion criteria

* Exhibited signs of xerostomia * Serious oral pathology (e.g. extensive dental caries, periodontal disease) * Pregnant or lactating women * Frequent mouthwash or fluoride supplement use * Unable to have basic self-care ability (including oral hygiene practice) * History of allergies, metabolic diseases such as diabetes, or other medical conditions that could interfere with the study. * Be caries free in oral cavity

Design outcomes

Primary

MeasureTime frameDescription
Saliva Fluoride Concentration (Part Per Million,Ppm)on days 1, 14, 15, and 3 months and 1.5 years of wearing the dentureWhole mixed saliva was collected by passive drooling into individual plastic vials to a volume of 2 ml while wearing the denture to determine the capacity for fluoride release and recharge from the denture. Saliva fluoride concentrations (ppm) were assessed at multiple time points (baseline, days 1, 14, 15, and 3 months and 1.5 years) to compare with baseline concentration under the conditions that the participants wear the resin denture at least 1 hour and refrain from tooth brushing at least 2 hours before saliva sampling. The salivary fluoride content (ppm) of each solution was determined using a fluoride ion electrode (item number 27502-19, Cole-Palmer, USA) connected to a 710 A plus fluoride ion meter (item number 067952, Thermo Orion, USA).

Secondary

MeasureTime frameDescription
Assessment of Enamel CariesBaseline and 1.5 years of follow upCaries record per surface using ICDAS coding system were determined at baseline and at 1.5 years of follow-up

Countries

Thailand

Participant flow

Recruitment details

Recruitment of subjects was carried out through hospital media from three government hospitals; Krathum Baen Hospital, Samut Sakhon Province, Health Promotion Center Region 1, Bangkok and Thammasat University Hospital, Pathum Thani Province. Subjects who were interested in the study could register directly at the dental clinic.

Pre-assignment details

Subjects who registered for a screening appointment at the dental clinic were asked to complete a questionnaire and underwent an oral screening and a simple test of salivary flow rate at the screening visit. The subjects who met eligibility criteria were asked whether or not they would agree to participate in the study.

Participants by arm

ArmCount
PMMA Resin
A denture base was made with PMMA resin as a standard material. PMMA resin: Polymethyl methacrylate (PMMA) resins have been used for the fabrication of resin denture base for 50 years. The advantages of PMMA resin that most notably is the ease of fabrication with very simple equipment but a limitation is the fragility because of its physical properties that include low flexural strength and surface hardness.
74
PMMA Resin & S-PRG Filler
A denture base was made from PMMA resin containing S-PRG fillers for subject to wear. Surface pre-reacted glass-ionomer (S-PRG) filler is a new type of biological material. This new material is being used in the formulation of dental product as filling materials. It has an anti-plaque effect which will release ions to alter the pH of the surrounding environment when it comes into contact with water or acidic solutions. These ions will exert their effect on caries prevention. The amount of S-PRG filler that is put in the standard resin denture base is 20% by weight. They are incorporated into the resin denture base and maintain the mechanical properties as required by ISO 1567. PMMA resin: Polymethyl methacrylate (PMMA) resins have been used for the fabrication of resin denture base for 50 years. The advantages of PMMA resin that most notably is the ease of fabrication with very simple equipment but a limitation is the fragility because of its physical properties that inc
76
Total150

Withdrawals & dropouts

PeriodReasonFG000FG001
Overall StudyLost to Follow-up1516

Baseline characteristics

CharacteristicPMMA Resin & S-PRG FillerPMMA ResinTotal
Age, Categorical
<=18 years
0 Participants0 Participants0 Participants
Age, Categorical
>=65 years
0 Participants0 Participants0 Participants
Age, Categorical
Between 18 and 65 years
76 Participants74 Participants150 Participants
Age, Continuous47.66 years
STANDARD_DEVIATION 10.58
48.31 years
STANDARD_DEVIATION 10.81
47.98 years
STANDARD_DEVIATION 10.66
Region of Enrollment
Thailand
76 participants74 participants150 participants
Sex: Female, Male
Female
60 Participants59 Participants119 Participants
Sex: Female, Male
Male
16 Participants15 Participants31 Participants

Adverse events

Event typeEG000
affected / at risk
EG001
affected / at risk
deaths
Total, all-cause mortality
0 / 740 / 76
other
Total, other adverse events
0 / 740 / 76
serious
Total, serious adverse events
0 / 740 / 76

Outcome results

Primary

Saliva Fluoride Concentration (Part Per Million,Ppm)

Whole mixed saliva was collected by passive drooling into individual plastic vials to a volume of 2 ml while wearing the denture to determine the capacity for fluoride release and recharge from the denture. Saliva fluoride concentrations (ppm) were assessed at multiple time points (baseline, days 1, 14, 15, and 3 months and 1.5 years) to compare with baseline concentration under the conditions that the participants wear the resin denture at least 1 hour and refrain from tooth brushing at least 2 hours before saliva sampling. The salivary fluoride content (ppm) of each solution was determined using a fluoride ion electrode (item number 27502-19, Cole-Palmer, USA) connected to a 710 A plus fluoride ion meter (item number 067952, Thermo Orion, USA).

Time frame: on days 1, 14, 15, and 3 months and 1.5 years of wearing the denture

Population: A total of 150 Thai adults aged 35-60 years, were initially enrolled in this study. At a baseline visit, 31 males (20.7%) and 119 females (79.3%) with a mean age of 48.9 ± 10.6 years fulfilled the study inclusion criteria and participated in this study. Approximately eighty percent (119/150) of the study adults were followed over 1.5 years.

ArmMeasureGroupValue (MEAN)Dispersion
PMMA ResinSaliva Fluoride Concentration (Part Per Million,Ppm)Baseline0.05 part per million,ppmStandard Deviation 0.04
PMMA ResinSaliva Fluoride Concentration (Part Per Million,Ppm)Day 10.09 part per million,ppmStandard Deviation 0.07
PMMA ResinSaliva Fluoride Concentration (Part Per Million,Ppm)Day 140.06 part per million,ppmStandard Deviation 0.06
PMMA ResinSaliva Fluoride Concentration (Part Per Million,Ppm)Day 150.11 part per million,ppmStandard Deviation 0.11
PMMA ResinSaliva Fluoride Concentration (Part Per Million,Ppm)3 months0.12 part per million,ppmStandard Deviation 0.12
PMMA ResinSaliva Fluoride Concentration (Part Per Million,Ppm)1.5 Years0.08 part per million,ppmStandard Deviation 0.12
PMMA Resin & S-PRG FillerSaliva Fluoride Concentration (Part Per Million,Ppm)3 months0.26 part per million,ppmStandard Deviation 0.15
PMMA Resin & S-PRG FillerSaliva Fluoride Concentration (Part Per Million,Ppm)Baseline0.05 part per million,ppmStandard Deviation 0.05
PMMA Resin & S-PRG FillerSaliva Fluoride Concentration (Part Per Million,Ppm)Day 150.23 part per million,ppmStandard Deviation 0.13
PMMA Resin & S-PRG FillerSaliva Fluoride Concentration (Part Per Million,Ppm)Day 10.22 part per million,ppmStandard Deviation 0.12
PMMA Resin & S-PRG FillerSaliva Fluoride Concentration (Part Per Million,Ppm)1.5 Years0.32 part per million,ppmStandard Deviation 0.2
PMMA Resin & S-PRG FillerSaliva Fluoride Concentration (Part Per Million,Ppm)Day 140.06 part per million,ppmStandard Deviation 0.05
Comparison: Mean saliva fluoride concentration (part per million) collected at different time points was compared in order to assess the change in capacity for fluoride release and recharge from the resin denture base and to assess differences between the control and the intervention group.p-value: <0.05ANOVA
Secondary

Assessment of Enamel Caries

Caries record per surface using ICDAS coding system were determined at baseline and at 1.5 years of follow-up

Time frame: Baseline and 1.5 years of follow up

Population: The transition (∆Q) of surface number, n (%) of developed new caries from baseline to 1.5 years of follow up was determined as progression or arrested rate.

ArmMeasureGroupValue (COUNT_OF_UNITS)
PMMA ResinAssessment of Enamel CariesArrest3353 Caries examined (number of surface)
PMMA ResinAssessment of Enamel CariesProgress170 Caries examined (number of surface)
PMMA Resin & S-PRG FillerAssessment of Enamel CariesArrest3402 Caries examined (number of surface)
PMMA Resin & S-PRG FillerAssessment of Enamel CariesProgress77 Caries examined (number of surface)
Comparison: Caries assessments were performed to examine the difference in mean number of surface caries (DMFS) ± standard deviation between the control and the intervention groups at baseline and at 1.5 years.The transition (∆Q) of developed new caries surfaces (ICDAS score 1-3) from baseline to 1.5 years of follow-up for the two groups was analyzed with respect to arrest or progress rates. Numbers of new caries surfaces were compared by independent t-test, Pearson chi-square and correlation coefficient.p-value: <0.05Chi-squared

Source: ClinicalTrials.gov · Data processed: Feb 4, 2026