Skip to content

PK Study of Melphalan HCL & Alkeran for Injection of MA Conditioning in MM Patients of Autologous Transplantation

AA Phase IIA Open-Label, Randomized, PK Comparative, Cross-Over Study of Melphalan HCL for Injection (Propylene Glycol-Free) and Alkeran for Injection for Myeloablative Conditioning in MM Patients Undergoing Autologous Transplantation

Status
Completed
Phases
Phase 2
Study type
Interventional
Source
ClinicalTrials.gov
Registry ID
NCT00925782
Enrollment
24
Registered
2009-06-22
Start date
2010-01-31
Completion date
2011-07-31
Last updated
2019-12-17

For informational purposes only — not medical advice. Sourced from public registries and may not reflect the latest updates. Terms

Conditions

Multiple Myeloma

Keywords

autologous stem cell transplantation

Brief summary

To assess and compare the pharmacokinetics of Melphalan HCL for Injection (Propylene Glycol-Free) versus Alkeran for Injection in multiple myeloma (MM) patients undergoing autologous stem cell transplant (ASCT).

Detailed description

This study will be a multicenter, open-label, randomized, comparative, cross-over study of high-dose Melphalan HCl for Injection (Propylene Glycol-Free) and Alkeran for Injection conducted in 24 patients who have symptomatic MM and qualify for ASCT. During the Study Period, patients will be randomized to receive 100mg/m2 of either Melphalan HCl for Injection (Propylene Glycol-Free) or Alkeran for Injection on Day -3 and the alternate drug product on Day -2. Blood samples for pharmacokinetic (PK) evaluation will be withdrawn through an indwelling i.v. cannula each day of melphalan dosing (Day -3 and Day -2). Following one day of rest after the myeloablative conditioning (Day -1), patients will receive an autologous graft.

Interventions

DRUGMelphalan HCL for Injection (Propylene Glycol-Free)/Alkeran for Injection

Patients will be randomized to receive 100 mg/m2 of Melphalan HCL for Injection (Propylene Glycol-Free) on Day -3 and Alkeran for Injection on Day -2 prior to ASCT.

DRUGAlkeran for Injection/Melphalan HCL for Injection (Propylene Glycol-Free)

Patients will be randomized to receive 100 mg/m2 of Alkeran for Injection on Day -3 and Melphalan HCL for Injection (Propylene Glycol-Free)on Day -2 prior to ASCT.

Sponsors

Acrotech Biopharma Inc.
Lead SponsorINDUSTRY

Study design

Allocation
RANDOMIZED
Intervention model
CROSSOVER
Primary purpose
TREATMENT
Masking
NONE

Eligibility

Sex/Gender
ALL
Age
18 Years to 70 Years
Healthy volunteers
No

Inclusion criteria

* Patients with symptomatic MM requiring treatment at diagnosis or anytime thereafter. * Patients with MM who qualify for ASCT therapy who have received appropriate primary induction therapy for transplantation. * Adult patients (≥ 18 years old) who are 70 years of age or younger at time of transplant; patients greater than 70 years of age may qualify on a case-by-case basis if the patient meets local institutional criteria to receive a total melphalan dose of 200 mg/m2 as a conditioning regimen and if approved by the Medical Monitor. * Patients with an adequate autologous graft which is defined as an unmanipulated, cryopreserved, peripheral blood stem cell graft containing at least 2 × 106 CD34+ cells/kg based upon patient weight. * Patients with adequate organ function as measured by: * Cardiac: Left ventricular ejection fraction at rest \>40% (documented within 12 weeks prior to Day -3). * Hepatic: Bilirubin \<2 × the upper limit of normal (ULN) and ALT/AST \<3 × ULN. * Renal: Creatinine clearance \>40 mL/minutes (measured or calculated/estimated). * Pulmonary: DLCO, FEV1, FVC \>50% of predicted value (corrected for Hgb) or O2 saturation \> 92% on room air (documented within 12 weeks prior to Day -3)

Exclusion criteria

* Patients who have never advanced beyond Stage 1 MM since diagnosis. * Patients who have previously received more than one autologous stem cell transplant. * Patients with plasma cell leukemia. * Patients with MM and systemic AL amyloidosis. * ECOG performance status ≥2. * Patients with uncontrolled hypertension. * Patients with an active bacterial, viral, or fungal infection. * Patients with prior malignancies except resected basal cell carcinoma or treated cervical carcinoma in situ. Cancer treated with curative intent \>5 years previously will be allowed. Cancer treated with curative intent \<5 years previously will not be allowed unless approved by the medical monitor. * Female patients who are pregnant (positive ß-HCG) or breastfeeding. * Female patients of childbearing potential who are unwilling to use adequate contraceptive techniques during and for 1 month following study treatment with Melphalan HCl for Injection (Propylene Glycol-Free). * Patients seropositive for HIV. * Patients who are unwilling to provide informed consent. * Patients receiving other concurrent anticancer therapy (including chemotherapy, radiation, hormonal treatment, or immunotherapy, but excluding corticosteroids) within 21 days prior to the ASCT, or planning to receive any of these treatments prior to study discharge. * Patients concurrently participating in any other clinical study. * Patients who are hypersensitive or intolerant to any component of the study drug formulation.

Design outcomes

Primary

MeasureTime frameDescription
Area Under the Curve (0-t)Day -3 and Day -2AUC (0-t) was one of the pharmacokinetic endpoints to confirm pharmacokinetic similarity between Melphalan HCl for Injection (Propylene Glycol-Free) and Alkeran for Injection in patients with multiple myeloma. Pharmacokinetic similarity was defined as a difference of 20% or less in the 90% confidence intervals (CIs) for the ratios of the pharmacokinetic parameters (calculated using log-transformed data) for the two formulations. The AUC results provided is the summary of Melphalan PK following Melphalan-Alkeran injection in Sequence 1 and Alkeran-melphalan injection in Sequence 2.
Concentration-Max (Cmax)Day -3 and Day -2Cmax was one of the pharmacokinetic endpoints to confirm pharmacokinetic similarity between Melphalan HCl for Injection (Propylene Glycol-Free) and Alkeran for Injection in patients with multiple myeloma. Pharmacokinetic similarity was defined as a difference of 20% or less in the 90% confidence intervals (CIs) for the ratios of the pharmacokinetic parameters (calculated using log-transformed data) for the two formulations. The Cmax results provided is the summary of Melphalan PK following Melphalan-Alkeran injection in Sequence 1 and Alkeran-melphalan injection in Sequence 2.

Secondary

MeasureTime frameDescription
Determination of Myeloablation Following Melphalan-alkeran Sequence and Alkeran-melphalan Sequence Followed by ASCT30 daysANC \<0.5 × 109/L, absolute lymphocyte count (ALC) \<0.1 × 109/L, platelet count \<20,000/mm3, or bleeding requiring transfusion. The first of 2 consecutive days for which cell counts drop below these cutoff levels was recorded as the date of myeloablation. Since the two treatments were administered consecutively with 1 day rest, the time to myeloablation and myeloablation rate was measured after both treatments were administered. Comparison of sequence effect was not planned in the study and due to small sample size, it was not performed.
Determination of Engraftment Following Melphalan-alkeran Sequence and Alkeran-melphalan Sequence Followed by ASCT30 daysNeutrophil engraftment was defined as the first day of 3 consecutive days where ANC (absolute neutrophil count) was higher than 500/ul. The two drug treatments in this cross-over design were administered on 2 subsequent days (Day -3 and Day -2). No per arm analysis was performed. Since the two treatments were administered consecutively with 1 day rest, the time to engraftment and engraftment rate was measured after both treatments were administered.

Countries

United States

Participant flow

Recruitment details

The study was conducted at a single study center (University of Kansas Medical Center -two facilities) in the United States under the direction of the investigator, Omar S. Aljitawi, M.D.

Pre-assignment details

No patients that were enrolled in the study were excluded from the trial prior to assignment to groups.

Participants by arm

ArmCount
All Study Participants
Open-label, randomized, cross-over design study where Propylene Glycol Free Melphalan and Alkeran were assessed in the same multiple myeloma patients
24
Total24

Baseline characteristics

CharacteristicAll Study Participants
Age, Categorical
<=18 years
0 Participants
Age, Categorical
>=65 years
1 Participants
Age, Categorical
Between 18 and 65 years
23 Participants
Age, Continuous57 years
STANDARD_DEVIATION 5
Region of Enrollment
United States
24 participants
Sex: Female, Male
Female
11 Participants
Sex: Female, Male
Male
13 Participants

Adverse events

Event typeEG000
affected / at risk
deaths
Total, all-cause mortality
— / —
other
Total, other adverse events
24 / 24
serious
Total, serious adverse events
7 / 24

Outcome results

Primary

Area Under the Curve (0-t)

AUC (0-t) was one of the pharmacokinetic endpoints to confirm pharmacokinetic similarity between Melphalan HCl for Injection (Propylene Glycol-Free) and Alkeran for Injection in patients with multiple myeloma. Pharmacokinetic similarity was defined as a difference of 20% or less in the 90% confidence intervals (CIs) for the ratios of the pharmacokinetic parameters (calculated using log-transformed data) for the two formulations. The AUC results provided is the summary of Melphalan PK following Melphalan-Alkeran injection in Sequence 1 and Alkeran-melphalan injection in Sequence 2.

Time frame: Day -3 and Day -2

Population: The pharmacokinetic-evaluable population was defined as all patients who completed dosing and adequate pharmacokinetic blood draws for the calculation of AUC and Cmax for both Melphalan HCl for Injection and Alkeran for Injection.~The results are presented by each drug group that combines data from both sequence.

ArmMeasureValue (GEOMETRIC_MEAN)Dispersion
MelphalanArea Under the Curve (0-t)376577 min*ng/mLStandard Deviation 93401
AlkeranArea Under the Curve (0-t)341183 min*ng/mLStandard Deviation 91349
Primary

Concentration-Max (Cmax)

Cmax was one of the pharmacokinetic endpoints to confirm pharmacokinetic similarity between Melphalan HCl for Injection (Propylene Glycol-Free) and Alkeran for Injection in patients with multiple myeloma. Pharmacokinetic similarity was defined as a difference of 20% or less in the 90% confidence intervals (CIs) for the ratios of the pharmacokinetic parameters (calculated using log-transformed data) for the two formulations. The Cmax results provided is the summary of Melphalan PK following Melphalan-Alkeran injection in Sequence 1 and Alkeran-melphalan injection in Sequence 2.

Time frame: Day -3 and Day -2

Population: The pharmacokinetic-evaluable population was defined as all patients who completed dosing and adequate subsequent pharmacokinetic blood draws for the calculation of area under the plasma concentration-time curve (AUC) and maximum plasma concentration (Cmax) for both Melphalan HCl for Injection and Alkeran for Injection.

ArmMeasureValue (GEOMETRIC_MEAN)Dispersion
MelphalanConcentration-Max (Cmax)4374 ng/mLStandard Deviation 1050
AlkeranConcentration-Max (Cmax)3931 ng/mLStandard Deviation 1034
Secondary

Determination of Engraftment Following Melphalan-alkeran Sequence and Alkeran-melphalan Sequence Followed by ASCT

Neutrophil engraftment was defined as the first day of 3 consecutive days where ANC (absolute neutrophil count) was higher than 500/ul. The two drug treatments in this cross-over design were administered on 2 subsequent days (Day -3 and Day -2). No per arm analysis was performed. Since the two treatments were administered consecutively with 1 day rest, the time to engraftment and engraftment rate was measured after both treatments were administered.

Time frame: 30 days

Population: The intent-to-treat (ITT) population was defined as all patients who received at least one dose of Melphalan HCl for Injection (Propylene Glycol-Free) or Alkeran for Injection. All efficacy analyses were to be performed on the ITT population.

ArmMeasureValue (MEAN)Dispersion
MelphalanDetermination of Engraftment Following Melphalan-alkeran Sequence and Alkeran-melphalan Sequence Followed by ASCT11 daysStandard Deviation 1
Secondary

Determination of Myeloablation Following Melphalan-alkeran Sequence and Alkeran-melphalan Sequence Followed by ASCT

ANC \<0.5 × 109/L, absolute lymphocyte count (ALC) \<0.1 × 109/L, platelet count \<20,000/mm3, or bleeding requiring transfusion. The first of 2 consecutive days for which cell counts drop below these cutoff levels was recorded as the date of myeloablation. Since the two treatments were administered consecutively with 1 day rest, the time to myeloablation and myeloablation rate was measured after both treatments were administered. Comparison of sequence effect was not planned in the study and due to small sample size, it was not performed.

Time frame: 30 days

Population: The intent-to-treat (ITT) population was defined as all patients who received at least one dose of Melphalan HCl for Injection (Propylene Glycol-Free) or Alkeran for Injection. All efficacy analyses were to be performed on the ITT population.

ArmMeasureValue (MEAN)Dispersion
MelphalanDetermination of Myeloablation Following Melphalan-alkeran Sequence and Alkeran-melphalan Sequence Followed by ASCT3 daysStandard Deviation 1

Source: ClinicalTrials.gov · Data processed: Feb 4, 2026